The time machine

Level 36

This walkthrough shows once you unlock the level.

The time machine stands on a sled of nickel runners on the slate table. A seat box with a red velvet cushion stands in the middle of its mahogany deck. A console of four dials stands in front of the seat on two twisted crystal columns, and the great disc of the ages stands upright behind the seat, with twelve round windows of painted ages and a brass pointer at the top. A model of the machine stands under a glass bell on a board of ivory and ebony squares, on a small table at the front right.

Start with the model and the console in any order. The model's trip marks three ages on the great disc, which the seat needs, and it lets the model move on the board, which gives the levers. The seat gives the crystal bar for the column, and the dials need the levers, the open console and the column. The shaded lamp on the deck, the brake lever beside the left runner and the two foot pedals at the front of the deck move when tapped and change nothing else.

The model
  1. Tap the brass knob on the glass bell over the model. The bell lifts off and stands on the slate beside the table.
  2. Tap the tiny white lever on the model's console. The model shivers and fades out of sight.
  3. Watch the great disc behind the seat. It turns and stops three times, and each time a window flashes amber. Beside the first window one amber bead lights, beside the second two beads and beside the third three beads. The beads stay lit for the rest of the game. The model then fades back onto its square.
The console
  1. Find the small brass bolt at the top edge of the mahogany fall front that covers the console. Tap it to draw it down.
  2. Tap the fall front. It swings forward and down on its hinge into a shelf, and shows four white dials, each with a hand and marks of one, two, three and four dots.

A tap on the fall front while the bolt is shut only knocks it against the bolt.

The board

The model must have made its trip first, see The model.

The board has four by four squares. Black ebony ridges stand between some squares, and two crystal gates stand between others, one blue-green and one amber. Each gate has a brass stud on another square, ringed in the gate's colour. Two crystal rings on the board are the lamps. A flat dial on the right of the board counts the beats, and a brass lever stands in front of it.

The rules:

  • Each beat, tap a square beside the model to step it there, or tap the model's own square to wait. A run lasts five beats.
  • A ridge stops the model. A gate stops it unless a copy of the model stood on that gate's stud at the end of the beat before. A gate sinks into the board while a copy stands on its stud.
  • After the fifth beat, pull the brass lever. The model fades out and back onto the first square, and the run it made stays on the board as a pale copy that repeats the run beat by beat as the model moves. Up to two pale copies can stand on the board. The lamps on the table's front edge show how many copies stand there.
  • Two copies may not stand on one square at the same beat, and may not change squares with each other in one beat. A step that breaks this flashes the model red and is refused. A step into a ridge or a raised gate knocks the model back.
  • The board is passed when copies, the model included, stand in both lamp rings at the fifth beat.

To take back a step, tap the beat dial. To start a run again, pull the lever before the fifth beat. To take away the last pale copy, pull the lever at the first beat.

A method that solves every board:

  1. Find the lamp that lies behind both gates, or behind the gate that is hardest to reach. Plan the last run to that lamp, and note the beat at which it passes each gate.
  2. Plan the run before it so that it stands on that gate's stud at the beat before the last run passes the gate. It may need to pass the other gate itself.
  3. Plan the first run so that it stands on the other gate's stud at the beat before the second run passes that gate. The first run needs no gate.
  4. Two of the three runs must end in the lamp rings. Let the runs wait on a square where they keep out of each other's way.
  5. Play the runs in that order, pulling the lever after the first and the second.

When both lamps light, the drawer in the front of the table slides out with two levers in it. Tap the levers to put them in the satchel.

The seat

The model must have made its trip first, see The model.

  1. Find the three brass rings on the left side of the seat box. Each ring carries six painted ages, and the window in front shows one age on each ring.
  2. Look at the great disc. Three windows carry lit amber beads beside them: one bead, two beads and three beads.
  3. Tap the front ring until it shows the age of the window with one bead. Tap the middle ring until it shows the age with two beads, and the back ring until it shows the age with three beads. Each tap turns a ring to its next picture.
  4. When all three are right, the cushioned lid of the seat box springs up. A twisted crystal bar lies on the velvet inside. Tap the bar to put it in the satchel. The lid then closes.
The column
  1. Look under the console. It leans down to the left, and under its left end a pair of brass cups stands empty.
  2. With the crystal bar from the seat in the satchel, tap the empty cups. The bar seats in the cups, the console rises level, and light runs from the columns along the deck and up into the hub of the great disc.
The dials

The console must be open, see The console, and the column must be fitted, see The column. The levers come from The board.

  1. With the levers in the satchel, tap one of the square sockets at the ends of the console. The travel lever stands in the right socket and the stop lever in the left socket.
  2. Tap a dial to choose it. The lamp above it lights.
  3. Tap the travel lever on the right. The great disc turns forward as many windows as the chosen dial's hand shows, and the window under the pointer lights blue-green. The hand of that dial then moves on to its next mark: from one dot to two, two to three, three to four, and four back to one.

The rules:

  • The machine may not stop in a window where something stands: an oak, a house, the sphinx or rocks. Open ground, such as a meadow, a beach, snow or dunes, is free.
  • The machine may not stop in a window it has already stopped in, the workshop at the top included. Those windows are lit blue-green.
  • A refused trip makes the machine shudder, flashes the window red and turns the disc back. Nothing changes.
  • The machine must stop in all three windows of white flowers.

Tap the stop lever on the left to take back the last trip. The disc turns back and the dial's hand moves back a mark.

A method that solves every game: count the windows from the pointer round the disc. For each trip, check each dial: where its hand would take the machine, and whether that window is free and unlit. Choose one, and remember which dials you have tried. When no dial works and a flower window is still dark, take back the last trip with the stop lever and try the next dial there. This search always reaches all three flower windows.

When the last window of flowers lights, the workshop dims and flickers through the days, the machine and the model fade out of the room, and they come back with a sprig of white flowers on the deck for each age of flowers.