The showman's box

Level 16

This walkthrough shows once you unlock the level.

A closed rosewood box stands on a plinth with four brass lion's paws on a marble table. A gilt mask hangs at the top centre of the front face. The top carries an inlaid star round a gilt ring with eight brass leaves in it. As you work it, the box unfolds into a toy theatre. The front falls forward as a stage apron, the two sides swing out as towers, and a fly tower of four tiers rises out of the top. Work the sections below in their order. The cue disc can be done at any time after both sides stand out, before or after the flies, the gas and the limes.

Tap a part of the box to fly the camera to it. Drag to turn the view. The step-back button at the bottom left zooms back out. The camera stays where it is after each step, so tap the next part yourself. Items you find go into the satchel at the top left. A part that needs an item takes it when you tap the part. These parts move but open nothing, so you can ignore them:

The mask
  1. Look under the box at the front left corner. That lion's paw has a bright brass collar at its ankle and two thread lines under it. The other three paws have none.
  2. Tap the paw, or drag round it. It unscrews in three turns with a ticking sound and goes into the satchel as the paw key. A thin brass post now holds up that corner.
  3. Tap the mask's open mouth. A square steel spindle sits in it. The paw key slides onto the spindle with a click. If you tap the mouth before you have the key, the mask knocks and wobbles and nothing else happens.
  4. Turn the key round three full turns. Drag clockwise round the mouth, or tap the key once for each turn. It ticks at every quarter turn.
  5. After the third turn the key drops out. The mask's eyelids roll up on two glowing amber eyes, and a music box inside plays a tune of eight notes. The eight brass leaves on the top slide open, and the showman rises through the hole on a brass column. The showman wears a red coat and a top hat. He lifts the hat and holds out his black cane.
  6. Tap the cane. It goes into the satchel. The showman points down at the two brass catches on the front.
The fall front
  1. Tap the brass catch at the top left corner of the front face. It flips up with a click.
  2. Tap the brass catch at the top right corner.
  3. With both catches open, the front falls forward on two iron chains and stops level as the apron with a thud. The mask swings on its pin and hangs from the apron's front edge. A row of footlights stands up along that edge. Behind the apron stand a gilt arch and a closed crimson curtain. An oval poster hangs at the top of the arch.
  4. Drag down the crimson cord with the gilt tassel at the right side of the arch, or tap it. The curtain gathers up into three swags with a long scrape. Brass slots and brass stars are set in the stage floor and the apron.

The front stays shut until the mask is wound and the showman has risen. Before then, both catches flip but the front moves a few millimetres and knocks on a bolt inside. If you leave both catches open, the front falls by itself shortly after you take the cane.

The wings
  1. Find the hinge on the left front corner of the box. A steel pin with a small brass ring at its top stands up out of the hinge, a little above the top of the box.
  2. Tap the pin. It lifts, and the left side swings out on its front edge through a quarter turn with a rumble and a thud. It stands beside the arch as a tower, with its outer face now facing the front. That face carries a large round disc.
  3. Tap the pin on the right front corner. The right side swings out the same way. Its face carries a brass-framed panel with a gauge on it.
  4. When both towers stand out, four painted figures spring up at the ends of the slots on the stage and the apron.

The pins work only after you take the cane in the mask section. While the front still stands, a pin lifts, the side knocks against the front's edge and the pin drops back. Open the front first.

The flies
  1. Turn the view to the back of the box. High in the centre of the back face is a small inlaid shutter with a finger notch on its left side, between two brass rails.
  2. Drag the shutter to the right, or tap it. It slides aside and shows a square steel spindle in a dark recess.
  3. Tap the spindle. The paw key from the mask section slides onto it with a click.
  4. Tap the key again to turn it. The top rises as a roof on four nested tiers with portholes, which takes about five seconds. The showman rides up on the roof. A painted cloth unrolls at the back of the stage and shows faint grey pictures. Four brass limelights swing up out of traps in the stage floor.

The spindle can be reached from the start, but the top rises only when both sides stand out as towers. Before then, the key ticks round, the top strains, the hinge pins rattle and the key turns back with a knock. The key stays on the spindle, so tap it again once both towers stand out.

The gas

The gas table is the brass-framed panel on the right tower's face. A round gauge sits at the top. A copper pipe runs across the middle with a square-headed tap in its centre. A spark pump with a black knob stands at the lower right, and a small brass jet at the lower left.

  1. Tap the square head of the tap. The showman's cane, from the mask section, fits onto it and stays there as its handle. It leaves the satchel.
  2. Tap the cane, or drag it a quarter turn anticlockwise. The tap clanks, the gas hisses and the gauge's needle rises.
  3. Tap the black knob of the spark pump. The plunger goes down and sparks fly from the jet. The jet catches, and a flame runs along the footlights from the right end of the apron to the left. The four limelights then light one after another from the right, each with a coloured beam on the painted cloth.

You can fit the cane and open the tap as soon as you hold the cane, even while the right side is still closed and the gas table faces the right. The lights catch only after the fly tower is up. Before then, the gauge's needle rises and falls back after about a second, and the spark pump only throws sparks.

The limes

The four limelights stand in a row across the stage, in front of the painted cloth. The cloth is divided into five bays, numbered 1 to 5 here from left to right as seen from the front. Each limelight has a wheel of three coloured glasses, red, green and blue, on a post above its lamp. The glass at the bottom of the wheel, above a small brass pointer, is the colour of its beam. Each beam lights two neighbouring bays.

The oval poster at the top of the arch shows the five bays as they must look. The background colour of each bay on the poster is the light that bay must receive. Mixed light shows as a mixed colour:

  • Red, green or blue is light from one beam of that colour.
  • Yellow is red and green together.
  • Magenta is red and blue together.
  • Turquoise is green and blue together.

Each colour of light brings out its own picture on the cloth. Red brings out the night sea with the lighthouse. Green brings out the harbour with the ship. Blue brings out the storm with the sea serpent. A bay lit by one colour shows its picture as a dark silhouette on that colour. A bay lit by two colours shows two pictures in colour. A bay whose colour matches the poster also shows the same pictures.

Each limelight reaches only some of the bays:

  • The far left lime lights bays 1 and 2, or bays 2 and 3.
  • The second lime from the left lights bays 1 and 2, 2 and 3, or 3 and 4.
  • The second lime from the right lights bays 2 and 3, 3 and 4, or 4 and 5.
  • The far right lime lights bays 3 and 4, or bays 4 and 5.

Tap a lime's wheel to bring the next glass to the bottom. The order is red, green, blue, then red again. Tap a lime's lamp house to swing its beam one bay to the right. From its last position it swings back to its first. The beams and the cloth light up only after the gas section is done. The wheels and lamp houses move before then, but the limes stay dark and the cloth stays grey.

  1. Read the poster's five bays from left to right and write down the colour of each.
  2. For each of red, green and blue, list the bays that need it. Those bays come in groups of neighbouring bays. A group of two bays needs one beam of that colour. A group of three needs two beams that share the middle bay. A group of four needs two beams side by side. A group of five needs three beams.
  3. Add up the beams. The total is four or three. When it is three, add a fourth beam of any colour on two neighbouring bays that both already need that colour.
  4. Give each beam to a lime that can reach its two bays. Bay 1 can be lit only by the two left limes. Bay 5 can be lit only by the two right limes.
  5. Tap each lime's lamp house until its beam lies on its two bays. Tap its wheel until its glass is the right colour.
  6. Compare the cloth with the poster bay by bay. A bay that shows the wrong colour has a beam too many or too few on it. Tap the wheel or the lamp house round again to change that beam.

Worked example with made-up values. The poster shows yellow, yellow, green, turquoise, blue.

  • Red is needed in bays 1 and 2. That is one red beam on bays 1 and 2.
  • Green is needed in bays 1 to 4. That is two green beams, on bays 1 and 2 and on bays 3 and 4.
  • Blue is needed in bays 4 and 5. That is one blue beam on bays 4 and 5.
  • The total is four. Set the far left lime to red on bays 1 and 2, and the second lime from the left to green on bays 1 and 2. Set the second lime from the right to green on bays 3 and 4, and the far right lime to blue on bays 4 and 5.

When every bay matches the poster, the cloth brightens, the poster lights up and the music box plays its tune.

The cue disc

The cue disc is the large round disc on the left tower's face. It has four coloured rings of eight holes, one ring for each figure on the stage:

  • The outer blue ring is the captain in the blue coat and peaked cap.
  • The red ring is the pirate in the red coat with a cutlass.
  • The yellow ring is the lighthouse keeper in yellow oilskins with a lantern.
  • The inner green-blue ring is the mermaid.

A brass reading bar runs down from the top of the disc to the centre, with a badge in each figure's colour at its ring. Brass spoke lines divide the disc into eight wedges. Number them 1 to 8 here. Wedge 1 is immediately left of the reading bar. Count on anticlockwise: wedges 2 and 3 run down the left side, 4 and 5 lie across the bottom, 6 and 7 run up the right side and wedge 8 is immediately right of the bar. When the disc plays, it turns clockwise and the wedges pass under the bar in that order. A tray of loose steel pegs sits below the disc. A trip lever with a red knob stands at the lower right. A square steel spindle sits in the hub at the centre.

Each figure stands at one end of its brass slot:

  • The captain at the left end of a slot across the stage floor.
  • The pirate at the right end of a slot across the apron.
  • The keeper at the back of the stage, on a slot that runs forward towards the apron's front edge.
  • The mermaid at the apron's front edge, on a slot that runs back to the rear of the stage.

The rules:

  • A peg in a figure's ring moves that figure one step along its slot when its wedge passes the bar. All figures with a peg in the same wedge move at the same moment.
  • Each slot has six stopping places. The figure starts on the first. The slot crosses another slot at the second and at the fifth, and ends at the sixth.
  • Each figure has a brass star in its slot. The number of pegs it needs is the number of steps to its star. A star one step short of the second crossing needs 3 pegs. A star on the second crossing needs 4. A star at the far end needs 5. The tray holds exactly enough pegs for all four figures.
  • Bright brass music pins fill some holes. No peg can go there.
  • Two figures may not stand on the same crossing after the same wedge. The captain and the keeper share their first crossings. The pirate and the mermaid share their first crossings. The captain and the mermaid share their second crossings. The pirate and the keeper share their second crossings. The captain and the pirate never meet, and neither do the keeper and the mermaid.

When two figures meet, they knock together and fall flat, the disc jams with a clunk and stops with that wedge under the bar, and the figures slide back to their starts. A figure given too many pegs knocks on the end of its slot and the disc jams. A run that leaves a figure off its star ends with all the figures sliding back. The pegs stay where you put them after every run. Tap a peg to take it back to the tray.

  1. Tap the square spindle in the hub. The paw key from the mask section fits and winds the disc by itself. You need to do this once.
  2. Count the pegs each figure needs from the position of its star.
  3. For each ring, write down the wedges whose holes have no music pin. Each ring has one or two more free holes than its figure needs.
  4. Work out how long each figure stands on each crossing. A figure reaches its first crossing at the wedge of its first peg and leaves it at the wedge of its second peg. It reaches its second crossing at the wedge of its fourth peg and leaves it at the wedge of its fifth peg. A figure with 4 pegs stays on its second crossing to the end. A figure with 3 pegs never reaches its second crossing.
  5. Choose the holes so that no two partners stand on their shared crossing after the same wedge. One figure may leave a crossing at the same wedge as its partner arrives. When one partner ends on a crossing, the other partner must pass that crossing before the first one arrives.
  6. When a pair meets, change which free hole one of the two leaves empty, and check that pair again. Each ring leaves only one or two holes empty, so each ring has few choices.
  7. Tap each chosen hole to set a peg in it. The peg's cap is the colour of its ring.
  8. Tap the trip lever.

Worked example with made-up values. The captain and the pirate need 4 pegs each, and the keeper and the mermaid need 5 each. The captain's ring has music pins in wedges 6, 7 and 8. The pirate's ring has them in 5, 7 and 8. The keeper's ring has them in 5 and 8. The mermaid's ring has them in 7 and 8.

  • Set the captain's pegs in wedges 2, 3, 4 and 5. He stands on his first crossing after wedge 2, and on his second crossing from wedge 5 to the end.
  • Set the keeper's pegs in wedges 1, 2, 3, 4 and 6. He stands on his first crossing after wedge 1, and on his second crossing after wedges 4 and 5.
  • Set the pirate's pegs in wedges 2, 3, 4 and 6. He stands on his first crossing after wedge 2, and on his second crossing from wedge 6 to the end.
  • Set the mermaid's pegs in wedges 1, 2, 3, 4 and 5. She stands on her first crossing after wedge 1, and on her second crossing after wedge 4.
  • No pair overlaps. The captain and the keeper use wedges 2 and 1. The pirate and the mermaid use wedges 2 and 1. The captain and the mermaid use 5 to 8 and 4. The pirate and the keeper use 6 to 8 and 4 to 5.

When every figure ends on its star, the figures bow and a small brass latch drops at the top of the disc with a click.

You can set pegs from the start of the level, and wind the disc as soon as you hold the paw key, while the left side is still closed and the disc faces the left. Before it is wound, the trip lever only knocks. Before both sides stand out, the disc turns once and plays the tune, but no figure is on the stage to move.

The pit
  1. Find the hinged lid with a brass ring at the centre of the apron's front edge, above the hanging mask.
  2. Drag the ring up, or tap it. The lid folds back, and five musicians and a conductor on a gilt podium stand up in the pit behind a gilt rail.
  3. Tap the conductor.

You can raise the pit as soon as the front is down. Until the limes and the cue disc are both done, the conductor lifts his baton, taps twice and lowers it, and the musicians turn to look at him. When both are done, he lifts his white baton and the orchestra starts the overture of the transformation scene.