The strongbox
Level 1
This walkthrough shows once you unlock the level.
The strongbox is an iron box on a marble table, with a boiler and chimneys on its lid. Five mechanisms lock it. The cipher dial is in the centre of the front face. The pressure manifold is on the sloped panel on top of the lid. The gear train is on the right face. The steam organ is on the left face. The combination is the small panel at the right of the front face. Each mechanism after the cipher dial is behind a roller shutter until the one before it is finished, so work through them in the order of the sections below. After each one, the camera flies to the next mechanism and its shutter rolls up.
The ledger is the tall plate at the left of the front face. It has four windows, one above the other, and each shows a question mark at the start. Each of the first four mechanisms lights one window with a digit, from top to bottom, and a card names the digit. Tap a mechanism or the ledger to bring the camera to it. The step-back button at the bottom left returns the camera to the whole box. The box has no moving parts outside the five mechanisms. Two amber bulbs stand on top of the copper pipes at the sides of the cipher dial. They glow from the start, grow brighter after each finished mechanism and do nothing.
The cipher dial
The dial is open from the start. It has three rings: an outer brass ring, a silver middle ring and an inner copper ring. Each ring carries eight glyphs. The glyphs, their order on each ring and the start positions are different in every game.
- Tap the dial to bring the camera to it.
- Read the brass plaque above the dial. It shows three glyphs in a row. A small lamp sits to the right of each glyph.
- Find the brass arrow at the top of the dial. It points down into a narrow glass window that crosses all three rings.
- Drag the outer brass ring round until the left glyph of the plaque sits in the window under the arrow. Release the ring.
- Drag the silver middle ring round until the centre glyph of the plaque sits under the arrow. Release the ring.
- Drag the inner copper ring round until the right glyph of the plaque sits under the arrow. Release the ring.
A ring ticks for each glyph it passes. On release it clicks into the nearest of its eight positions. When a ring rests with its glyph under the arrow, the lamp beside that glyph on the plaque lights green and a chime sounds. Turning one ring does not move the others.
When all three lamps are lit, the jewel at the centre of the dial glows green and the top window of the ledger lights with the first digit.
The pressure manifold
The manifold is the sloped iron panel on top of the lid, facing the front. When its shutter rolls up, the three needles swing up and fall back. The panel has three gauges in a row with a copper valve wheel under each gauge. Each gauge face has a green arc and a small lamp in its lower part. The green arcs are in different places in every game.
The valves feed one shared pipe, so each wheel moves more than one needle:
- The left wheel moves the left needle a lot and the middle needle a little.
- The middle wheel moves all three needles, and the middle needle the most.
- The right wheel moves the right needle a lot and the middle needle a little.
Drag round a wheel anticlockwise to open it. Its needles move clockwise to higher numbers. Drag round a wheel clockwise to close it. Its needles move back to lower numbers. A wheel turns one and a quarter turns from closed to fully open, and stops with a clank at either end. When a needle enters its green arc, its lamp lights green with a click. When a needle leaves its arc, its lamp goes out. To undo a turn, turn the same wheel back the other way.
This method reaches the arcs in any game:
- Turn the left wheel until the left needle points at the middle of its green arc.
- Turn the middle wheel until the middle needle points at the middle of its green arc.
- Turn the right wheel until the right needle points at the middle of its green arc.
- Look at the three lamps. If any lamp is dark, repeat steps 1 to 3. If a wheel stops at its end before its needle reaches the arc, leave it there and go on to the next wheel.
- When all three lamps are lit, let go of the wheel and wait one second.
When all three needles stay in their arcs for about a second, the panel is finished. Steam puffs from the two pipes at its sides and the second window of the ledger lights with the next digit.
The gear train
The gear train is on the pale panel on the right face of the box. The pegs and gears are the same in every game.
- The brass drive gear at the upper left turns all the time. A piston below it moves up and down.
- The copper lock gear at the lower right stands still. A brass bolt with a toothed rack stands to its right, under a green lamp.
- Five steel pegs, each in a brass ring, stand on the panel between them.
- Three loose gears lie on a wooden tray on the table in front of the panel: a medium brass gear on the left, a large copper gear in the middle and a small silver gear on the right.
Two gears turn together only when their teeth meet. A gear on a peg turns only when it meets a gear that already turns. A gear of the wrong size, or on the wrong peg, sits still.
Drag a gear from the tray up towards the panel. It turns upright, and the rings of the free pegs glow. Release it over a peg. It drops onto the nearest free peg with a clank. Release it away from every peg and it slides back to the tray. A peg holds one gear. To undo a move, drag the gear off its peg and release it over another free peg or away from the pegs.
- Drag the large copper gear onto the peg left of the centre of the panel, a little below the middle. It meets the drive gear and starts to turn.
- Drag the small silver gear onto the peg near the top of the panel, right of the centre. It meets the copper gear and starts to turn.
- Drag the medium brass gear onto the peg at the upper right, above the lock gear and a little to its left. It meets the silver gear and the lock gear, and both start to turn.
The two pegs along the bottom of the panel lead nowhere. A gear on either of them never reaches the drive gear.
When the lock gear turns, a clank sounds and the green lamp above the bolt glows. About a second later the bolt slides up and the third window of the ledger lights with the next digit.
The steam organ
The steam organ is on the pale panel on the left face of the box. Four brass pipes stand in a row, the tallest on the left and the shortest on the right. Under each pipe is an amber lamp, and under each lamp is a lever. A column of five green lamps stands at the right edge of the panel, above a red button.
When the shutter has rolled up, the organ plays a sequence of five notes. For each note, the amber lamp under one pipe lights, that pipe sounds and steam puffs from its top. The same pipe never plays twice in a row, but a pipe can play more than once. The sequence is different in every game.
- Watch the whole sequence and write down the pipes in order, counted from the left. For example: 2, 4, 1, 2, 3.
- When the sequence ends, tap the lever under the pipe of the first note. The lever swings over and springs back, its pipe sounds and its amber lamp flashes.
- Tap the levers for the other four notes in the same order.
The levers and the red button do nothing while the sequence plays. Each correct pull lights one more green lamp in the column, from the bottom up.
A wrong pull sounds a buzz and a card reads "Wrong order". The four amber lamps flash red, the green lamps go out and the sequence plays again. When it ends, start again from the first note. Tap the red button after the sequence has finished to hear it again. The replay also puts out the green lamps, so start again from the first note after it.
When the fifth pull is correct, all four amber lamps light and stay lit. The fourth window of the ledger lights with the last digit.
The combination
The combination is the small iron panel at the right of the front face. Four number drums turn behind a brass window. Each drum shows one digit in the row between the two red pointers at the sides of the window. The drums start on wrong digits.
The code is the four digits in the ledger. The top window of the ledger gives the left drum, and the bottom window gives the right drum. For example, if the ledger reads 4, 0, 7 and 2 from top to bottom, set the drums to 4, 0, 7 and 2 from left to right.
- Tap the ledger to bring the camera to it and read the four digits from top to bottom.
- Tap the step-back button at the bottom left, then tap the combination.
- Set the left drum to the top digit of the ledger.
- Set the second drum to the second digit.
- Set the third drum to the third digit.
- Set the right drum to the bottom digit.
Tap a drum to turn it on by one digit. After 9 comes 0. A drum that shows 8 takes four taps to reach 2. Drag a drum up to raise its digit or down to lower it. A drum ticks for each digit it passes and clicks when it settles on a digit.
When all four drums show the code, the clasps release, the lid swings open and the Aether Core rises out of the box. The workshop lights dim as the core and the two amber bulbs brighten, and the core lights the room.