The space telescope

Level 30

This walkthrough shows once you unlock the level.

A model telescope for the aether stands folded for launch on a pillar above a painted Earth, on an octagonal mahogany plinth. A sun lamp and a moon lamp stand in sockets on the plinth's top, a brass lectern stands at its front right and a telegraph key at its front left. The sun lamp's ball and its glow grow brighter with each mechanism you finish. The telescope has a brass bus with folded sails, a sunshade folded in two pallets, a gold mirror with folded wings and a tripod, and an instrument box behind the mirror. Start with the drawer, the cradle or the mirror. The sunshade needs the winding key from the drawer, and the segments need the mirror opened. The wheel comes after the cradle, the sunshade and the segments, and the camera last.

Five parts move and open nothing: the Earth turns a twelfth of a turn, the telegraph key makes the lamp on the bus's top blink, the dish on the bus's front left corner swivels, the star tracker's cap on the bus's top flips open, and the porthole's shutter on the bus's front right corner swings aside.

The drawer
  1. Look at the plinth's front face. The drawer has no handle. Beside it a brass sunburst has the rays on its right rubbed bright. Tap the sunburst. It sinks with a click and the drawer springs a little way out.
  2. Tap the drawer to pull it out.
  3. Tap the winding key, the dark slide and the observing card on the green baize to take them.
  4. Open the observing card in the satchel to read it. Its face shows a constellation in a dark blue ring and a disc of coloured glass. Its back shows the twelve constellations round a ring. The constellation and the glass change from game to game.
The cradle
  1. Look at the turntable at the top of the pillar. Two brass jaws grip the bus at its front and back. A lever with a red knob holds them, and a pin with a red tag passes through the lever's boss. Tap the pin to pull it out.
  2. Tap the lever. It throws forward, the jaws swing down and the telescope rocks on the turntable. It now hangs free.
  3. Look under the bus. A brass strap binds the two stacks of blue blades, with a ring pin at its front. Tap the ring. The strap drops, the blades fan open on both sides and the amber lamp on the bus lights.
The sunshade
  1. Tap the catch on the top of the brass pallet that stands in front of the mirror. Both pallets swing down level.
  2. Tap the square arbor on the front of the hub under the shade with the winding key. The key winds, four booms run out and the five violet layers spread between them. The sun lamp and the moon lamp now flash on the gold segments they reach past the shade: warm for the sun, cold for the moon. The gauge on the hub shows the cloth left on the reel.
  3. The rule: a segment is lit when the straight line from a lamp to it passes the shade's edge. The cloth comes off one reel, so a boom lets out only while the gauge shows cloth.
  4. Tap the brass knob at a boom's tip to let it out a notch. At its fifth notch, or with the reel empty, a tap winds it all the way back in. Tap it round to undo.
  5. Wind every boom in. Let out the boom that points most nearly at the sun lamp, a notch at a time, until the warm flashes stop falling. Do the same with the boom that points most nearly at the moon lamp. Then let out the booms next to them on the lamps' sides until the last flashes go. When the reel runs empty with flashes left, wind in the boom that points away from both lamps and give its cloth to the boom beside the flashes.
  6. When no segment flashes, the reel locks with a click.
The mirror
  1. Look at the gold mirror from the front. Its outer columns are folded forward over its face on brass hinges. A tripod lies folded up against the face, with a small round mirror at its head and a red knob below it.
  2. Drag the red knob forward and down, or tap it. The tripod swings out and its stay locks, with the small mirror in front of the middle of the mirror. While it lies folded, its struts stop the wings.
  3. Tap each wing. It swings out through a half turn and latches into the mirror.
The segments
  1. Orbit to the back of the telescope. A brass instrument box stands behind the mirror, with a blinking amber lamp on its sides and a round ground-glass screen on its back. Tap the toggle switch beside the screen. The test lamp lights. Each of the six inner segments throws a spot on the screen in the colour of the enamel tab on its back, and the outer segments throw a white spot on the middle. The spots show only while the tripod stands and both wings are open.
  2. Six slotted brass screws stand on the backplane, one on each seam between two inner segments. Drag round a screw to turn it, or tap it on one side to turn it a click that way.
  3. The rule: a click of a screw moves the spots of both segments at its seam one step along the seam. So each spot moves along the two seams beside its tab. A screw stops at two clicks either way.
  4. The rule break: a turn that would leave a segment's two screws more than two clicks apart would twist it. The screw stops with a clank and the segment's tab flashes red.
  5. To stack the spots, pick one coloured spot and count how many steps it lies from the middle along each of its two seams. Turn each of those two screws that many clicks the way that brings the spot in. Go on round the ring: the next spot shares a screw with the last, so only its other screw is left to turn. If a screw stops with a red flash, turn the screw on the segment's other seam part of the way first, then come back.
  6. When every spot lies on the middle, the screen shows one star with six spikes.
The wheel
  1. Look at the lectern at the plinth's front right. Its dial shows the twelve constellations as the plinth looks from above, with the front at the bottom. The pointer shows where the mirror faces. The sun mark and the moon mark show the lamps. Find the card's constellation on the dial.
  2. Tap above the lever to move it a notch up, or below it to move it a notch down. Each notch runs the flywheel in the bus faster one way and swings the telescope the other way. The telescope holds still only with the lever in the middle.
  3. The switch beside the fan folds or spreads the sails. The switch beside the hexagon folds or opens the wings.
  4. The rule: a notch swings the telescope one constellation with every part spread, two with the sails folded, three with the wings folded and four with both folded. The lever goes two notches either way.
  5. The rule break: the mirror must never face the sun lamp. A notch that would swing it within two constellations of the sun mark is refused: the mirror flashes, the warning lamp lights and the lever springs back. Move the lever back or flip a switch back to undo a move.
  6. A notch out with a part folded and a notch back with it spread turns the telescope by the difference with the lever back in the middle. With the wings folded out and spread back, the difference is two constellations. With the sails, one. With both folded out and only the sails spread back, one. With both folded out and both spread back, three.
  7. Count the constellations from the pointer to the card's constellation the way round that does not pass the sun mark. Make up that count from these differences, and check that each swing stays clear of the sun mark. Two notches out with parts folded swing twice as far.
  8. With the pointer on the card's constellation, the lever in the middle and the sails and the wings spread, the lever's catch drops with a click.
The camera
  1. Orbit to the left of the instrument box behind the mirror. Its left face has a slot across its top, a brass wheel of four coloured glasses under a ring, and a red release button. Tap the slot with the dark slide. The slide goes in with its brass draw handle showing.
  2. Tap the wheel until the glass under the ring at its top has the colour of the disc on the observing card.
  3. Tap the slide's draw handle to pull the draw out.
  4. Tap the red release button. With the telescope on the card's constellation, the right glass and the draw out, the shutter opens and the plate takes the picture. Otherwise the shutter snaps shut with a buzz.