The regulator

Level 2

This walkthrough shows once you unlock the level.

The regulator is a tall walnut clock cabinet with brass corner columns, standing on a wooden table. The front of the cabinet holds the clock face at the top, the pendulum case below it, and the star chart to the right of the pendulum case. The balance is on the left side of the cabinet. The mirror grid is on the right side. The orrery stands on top of the cabinet under a glass dome. The balance, the pendulum and the mirrors sit behind roller shutters that roll up when each one is ready. Drag on the view to turn it round the cabinet. Tap a part of the cabinet to fly to it. Tap the step-back button at the bottom left, a magnifying glass with a minus sign, to see the whole cabinet again. The back door, the copper stacks that puff steam and the brass finials on the corners do nothing.

Work in this order: the balance, then the pendulum, then the clock face and the mirrors in either order, then the orrery. The clock face has no shutter, and its hands turn from the start. The clock only starts to run when the pendulum keeps time. The first four mechanisms each light one sign on the star chart. The orrery needs all four signs. Tap the star chart to see it close up.

The balance

The balance is on the left side of the cabinet. Its shutter rolls up when the level starts. Turn the view until the left side faces you, then tap it.

A brass beam rests on a pivot at the top of a brass column. Four hooks hang under the beam on each side of the pivot, evenly spaced. Count the hooks outward from the pivot. The hook nearest the pivot is hook 1. The hook at the end of the beam is hook 4. A large dark brass weight with a number on its band hangs on one hook on the left. It cannot be moved. Four polished brass weights stand on the wooden shelf below the beam. Each shows its number on its band. A red needle stands up from the pivot in front of a small scale with a green centre mark. A green lamp sits to the right of the scale.

The rule: each weight pulls its side of the beam down by its number multiplied by its hook number. The beam rests level when the total on the left equals the total on the right. Each hook holds one weight. While the totals differ, the beam tilts down on the heavier side and the needle leans toward that side. The larger the difference, the further it leans, up to a limit.

  1. Read the number on the dark weight. Count which hook it hangs on. Multiply the two numbers. This is the left total.
  2. Choose weights and hooks on the right of the pivot whose products add up to the left total. An answer that uses two or three weights, all on the right, always exists.
  3. Drag each chosen weight from the shelf to its hook. Release it close to the hook. It hangs there with a clank.
  4. Leave the beam level for one second.

To find the answer, take one weight and try it on each right-hand hook in turn. Subtract its product from the left total. If the rest equals another weight's number times 1, 2, 3 or 4, hang that weight on that hook. If not, try to make the rest from two of the other weights. If nothing fits, start again with a different first weight.

For example, the dark weight shows 4 and hangs on hook 3 on the left. The left total is 12. The shelf holds 2, 3, 5 and 6. Hang the 6 on hook 1 on the right, which gives 6. Hang the 3 on hook 2 on the right, which gives 6 more. The right total is 12, and the beam rests level.

To take a weight off, drag it away from the hooks and release it. It slides back to its place on the shelf with a thunk. To move a weight to another hook, drag it to that hook. A weight you are dragging does not count toward either total.

The green lamp lights while the beam is level. After one second the solve sound plays, a card says a planet is charted, and the top window of the star chart lights with a sign. The camera then flies to the pendulum.

The pendulum

The pendulum case is on the front of the cabinet, below the clock face. Its shutter rolls up after the balance rests level, and the camera flies to it.

A steel rod hangs from the top of the case and swings from side to side. A brass bob shaped like a lens sits on the rod. A brass strip with 13 dark marks runs down the left of the case. Each mark is a notch where the bob can rest. An amber beat lamp at the top right of the case flashes at a steady rate. The pendulum ticks each time it passes the middle of its swing. The higher the bob sits, the faster the pendulum swings.

  1. Watch the beat lamp and listen to the ticks for a few swings.
  2. If the ticks come faster than the flashes, drag the bob down. If the ticks come slower than the flashes, drag the bob up. A brass pointer appears on the bob while you drag it and points at the marks. A tick sounds at each mark you pass.
  3. Release the bob. It settles on the nearest mark with a clank.
  4. Move the bob one mark at a time and wait two seconds after each move.

The right mark is never one of the top two marks or the bottom two marks. When the bob is on the right mark, the swing drifts into step with the lamp, so each tick comes with a flash. After one and a half seconds on the right mark, the solve sound plays and the second window of the star chart lights. The amber lamp at the lower right of the clock face lights with a clank, and the red seconds hand on the clock starts to step. The shutter on the right side of the cabinet rolls up, and the camera flies to the mirrors.

The clock face

The clock face is on the front of the cabinet at the top. It has no shutter. Its hands turn from the start of the level, but the clock checks the time only after the pendulum keeps time. Set it before or after the pendulum.

The small dark blue dial in the lower left part of the clock face shows the time to set. It has two brass hands and twelve cream marks, one for each hour. The marks at 12, 3, 6 and 9 are heavier. The short brass hand shows the hour. The long brass hand shows the minutes, five minutes per mark. The time is always on a five-minute mark.

For example, the long brass hand points at the fourth mark after the top, and the short brass hand sits a third of the way from the 7 mark to the 8 mark. The time is 7:20.

  1. Tap the clock face to fly to it.
  2. Drag round the centre of the dial in a circle. Clockwise moves the time forward. Anticlockwise moves it back. The long blued minute hand follows the drag. The short blued hour hand moves one hour for each full turn of the minute hand. A tick sounds at every five minutes.
  3. Release. The hands settle on the nearest five-minute mark with a click.
  4. Repeat until the long hand points at the same minute as on the small dial and the short hand points at the same hour.

When the clock runs and its hands match the small dial, the solve sound plays within a second and the third window of the star chart lights. If you set the time before the pendulum, this happens by itself shortly after the pendulum keeps time. If the time is wrong when the clock starts, nothing happens until you correct the hands.

The mirrors

The mirror grid is on the right side of the cabinet. Its shutter rolls up after the pendulum keeps time, and the camera flies to it.

An enamel plate is ruled with brass lines into five columns and four rows. A brass lantern stands at the left edge of the grid, level with one row. A brass receiver with a glass lens stands at the right edge, level with one row. The lantern and the receiver are in different rows in most games. Six squares hold a glass mirror in a brass frame on a brass turntable. Two squares hold an iron post with a brass cap. When the shutter opens, the lantern lights and shines a beam to the right along its row.

The rule: each mirror stands at a slant and turns the beam through a right angle. A mirror that slants like / turns the beam as follows:

  • A beam travelling right goes up.
  • A beam travelling left goes down.
  • A beam travelling up goes right.
  • A beam travelling down goes left.

A mirror that slants like \ turns the beam the other way in each case. An iron post stops the beam. A beam that leaves the grid anywhere other than at the receiver is lost. A bright spot shows where the beam stops. Tap a mirror to turn it a quarter turn. This changes its slant from / to \ or back. Tap it again to undo the turn. Each tap ticks, and the mirror clicks into place.

  1. Look left along the receiver's row from the receiver. The nearest mirror or post in that row must be a mirror. The beam strikes this mirror last.
  2. That mirror receives the beam from above or below. Look up and down its column for the nearest mirror on each side. One of them strikes the beam before it.
  3. Repeat, looking along rows and columns in turn, until you reach a mirror in the lantern's row with nothing between it and the lantern. The beam strikes at least four mirrors on the way. If a choice leads to a post or the edge of the grid, go back and try the other mirror.
  4. Start at the lantern. Tap the first mirror on your path until the beam leaves it toward the second mirror. Then set the second mirror the same way, and so on to the receiver.

Mirrors that are not on the path do not matter. When the beam reaches the receiver, the disc behind the lens glows green and the green lamp above the receiver lights. Within a second the solve sound plays and the bottom window of the star chart lights.

The orrery

The orrery stands on top of the cabinet under a glass dome. When both the clock face and the mirrors are done, the dome swings up and back on its hinge with a hiss and a thunk, and the camera flies to it.

A brass ring round the edge carries eight engraved signs: a sun, a moon, a star, a gear, a key, a drop, a diamond and a spiral. Each sign on the ring is turned so that its top faces outward. Inside the ring is a dark blue disc with four brass circular tracks and a glowing sun on a brass column at the centre. Four planets ride on thin steel rods that reach out from the centre:

  • A copper planet on the innermost track.
  • A green planet on the second track.
  • A brass planet with a ring on the third track.
  • A pale grey planet on the outermost track.

Each rod runs past its planet to a pointer tip in the planet's colour, at the inner edge of the sign ring.

The star chart on the front of the cabinet, to the right of the pendulum case, gives the signs. It has four rows. Each row has a painted planet on the left and a window on the right. From top to bottom the painted planets are copper, green, gold with a ring, and grey. Each window glows with the sign that its planet must point at.

  1. Tap the star chart to read the four signs, then tap the orrery to fly back to it.
  2. Press on a planet and drag it round its track. The press takes the planet nearest to it. A tick sounds at each sign you pass.
  3. Release when the planet's pointer tip is at its sign. The planet settles on the nearest sign with a chime.
  4. Repeat for the other three planets.

When all four pointer tips point at their signs for half a second, the orrery spins up, the workshop goes dark, the sun blazes and the clock strikes the hour it shows.