The print shop
Level 10
This walkthrough shows once you unlock the level.
An iron hand press stands in the middle of the print shop with a brass eagle on the lever at its top. Its bed runs out to the right on two rails, with the tympan hinged at the bed's right end and a small paper bank behind it. A drying line hangs on two posts behind the press. An oil lamp hangs on a bracket at the front of the left post. Its flame burns low at the start and a little brighter with each finished section. The type cabinet stands at the back left, the imposing stone at the front left, and the ink bench at the right. The left half of the ink bench holds a small proof press. Tap an object to bring the camera to it, and its parts then respond. Tap the bed or the paper bank to bring the camera to the tympan, and tap the frame of the press to bring it to the bar and the crank. Tap the step-back button at the bottom left, scroll out or pinch to see the whole shop again. The camera stays where it is when you finish an object, so tap the next one yourself. Work through the sections in the order below.
Some parts move and lead nowhere. Ignore them:
- the wooden stool with a round seat at the front right, which spins and rises on its screw
- the wooden hellbox on the table in front of the press, whose lid lifts on broken type
- the two old printed sheets pegged on the drying line, which swing
- the steel composing stick on the sloped case on top of the type cabinet, whose sliding knee moves to the other end
- the nine drawers of the type cabinet that the proof does not point at
The ink bench
The right half of the ink bench holds a steel tin of ink with a knurled lid at the back left, a palette knife at the front, a dark glass slab in the middle and a brayer, a roller with a wooden handle, on a wooden rest at the right.
- Tap the knurled lid of the tin twice. Each tap turns it one full turn with a tick. You can also drag round the lid in either direction for two turns. After two turns the lid lifts off with a click and lies beside the tin. Black ink shows in the tin.
- Tap the palette knife. It dips into the tin and lays a black bead of ink across the slab with a hiss. While the lid is on, the knife only taps the lid and returns.
- Tap the brayer. It rolls across the slab and back, and returns to its rest. Each pass spreads the ink with a hiss. You can also drag the brayer across the full width of the slab and back. Each full pass counts.
- Repeat until the brayer has made four passes. Two taps make four passes. The ink on the slab is then an even black, the roller turns black and a tick sounds. Before the bead is on the slab, the brayer only rocks on its rest with a squeak.
- Tap the black brayer to take it. It flies into your satchel at the top left.
- Tap the palette knife to take it. It flies into your satchel.
Both stay in your satchel for the rest of the level.
The proof press
The left half of the ink bench holds the proof press: an iron bed on two feet with steel rails, a brass galley in the middle holding a small woodblock, and a steel cylinder in an iron carriage at the left end of the rails. The face of the block is caked with dull black ink and shows no carving. A wooden tray of paper slips sits at the front, and a brass post with a clip stands at the back.
- With the brayer from the ink bench in your satchel, tap the caked block. The brayer rolls across it and back with a hiss, and the face of the block turns glossy black. Without the brayer, a card says the block takes ink from a roller.
- Tap the tray of slips. A slip lays itself on the block with a tick.
- Tap the cylinder. It rumbles across the galley and back, with a knock at each end.
- Tap the slip on the block. It lifts, stands up and clips onto the brass post at the back with a click.
A slip lifted from the block before it was inked, or before the cylinder ran over it, is blank and goes back to the tray. The block cannot be inked while a slip lies on it, so tap that slip first to send it back.
The printed slip shows a woodcut of the type cabinet: two columns of five drawers. One drawer is cut solid black with a pale knob, and a hand points at it from the side of its column. A hand on the left points into the left column, and a hand on the right points into the right column. Count the black drawer's row from the top. To read the slip more closely, scroll in or spread two fingers on it. For example, a black drawer second from the top with the hand on the right means the second drawer from the top in the right column.
The type cabinet
The type cabinet stands at the back left. It has ten drawers in two columns of five, each with a brass knob under an empty brass card frame. An iron locking bar runs down the middle between the columns.
- Tap the drawer that the proof from the proof press shows. It slides out with a scrape and a knock. The drawer from the proof holds a case of type and a grey line of metal type tied round with pale cord.
- Tap the tied line of type to take it. It flies into your satchel.
Only one drawer comes out at a time. While a drawer is out, a tap on another drawer knocks it against the locking bar and it stays in. Tap the drawer that is out to push it back. A wrong drawer holds only a case of type.
The imposing stone
The imposing stone stands at the front left: an iron top on an oak frame. An iron chase lies at the back of the stone with four rows. Each row is 12 picas long. A brass scale on the back bar of the chase has a tick at every pica, and every second tick is longer. The left of each row holds fixed matter:
- the back row holds a wooden block faced with a bright brass rule
- the second and third rows share a woodcut of a ship
- the third row has a plain wooden block after the woodcut in some games
- the front row is empty and takes the line of type
A rack of eight wooden furniture sticks lies in front of the chase, in two columns of four either side of a middle rail. The number on both ends of a stick is its length in picas. A steel key with a cross handle tipped with two brass balls lies to the right of the chase. Two brass quoins are set in the chase's right bar.
The rule: the space after the matter in each row is a gap, and the sticks must fill every gap exactly. A stick goes into a row only if it is no longer than the space left in that row. The quoins lock the chase only when the line of type is in place and every gap is filled exactly. The eight numbers add up to the four gaps together, so every stick is needed.
- With the line of type from the type cabinet in your satchel, tap the empty front row. The line drops into the left of the row with a thunk. Without the line, a card says the row waits for a line of type. The front row takes no stick until the line is in it.
- Measure each gap. Count the picas of the matter in the row on the scale and subtract that from 12. You can also count the picas on the scale from the end of the matter to the right bar.
- Tap a stick in the rack. It lifts a little with a knock. Tap a lifted stick again to put it down.
- Tap a row. The lifted stick slides into the row after the matter and any sticks already there, with a knock. You can also drag a stick from the rack onto a row. A stick longer than the space left knocks and goes back to the rack.
- To undo, tap a stick in the chase. It goes back to its place in the rack. A stick in the chase does not respond while a rack stick is lifted, so put that stick down first. You can also drag a stick out of the chase and drop it away from the rows.
- When every gap is filled, tap the steel key. It moves onto the right bar and turns. If every gap is exact and the line is in, the quoins spread and the chase locks with a rumble and a clank, and the key goes back to its rest. If not, the first loose row from the back shakes with three knocks and the key turns back with a click. Fix that row and tap the key again. The sticks cannot be moved once the chase is locked.
- Tap the locked chase. It lifts off the stone, swings across and is laid on the press's bed with a thunk and a clank. If the bed is run in under the press or the tympan is folded down, the chase lifts a little and sets back with a clank. Turn the crank to run the bed out, as in the bar section, and tap the tympan to lift it, then tap the chase again.
The gaps and the stick lengths are new each game. This method fills any chase:
- Write down the four gaps from the back row to the front row, and the eight stick numbers.
- Take the longest stick that is still in the rack. Choose a gap that it fits, where the rest of the gap is the number of another stick in the rack, or nothing.
- Fill that gap. Then check that the sticks left in the rack can still make every gap that is not yet filled.
- If they cannot, take the sticks out of that gap and try another gap or another partner. Some pairs add up to a gap but leave the other gaps impossible to fill.
- Repeat from step 2 until all eight sticks are in the chase.
For example, say the gaps are 6, 7, 5 and 8 picas from the back, and the sticks read 2, 2, 2, 3, 3, 4, 4 and 6. The 6 fits the gap of 6 alone, or the gap of 8 with a 2. The two 3s make 6 too, but that leaves 2, 2, 2, 4, 4 and 6. Those are all even numbers, so they cannot make the gap of 7. One fill that locks is 2 and 4 in the back row, 3 and 4 in the second row, 2 and 3 in the third row, and 2 and 6 in the front row.
The tympan
The tympan is a brass frame round a parchment skin, hinged at the right end of the press's bed. It stands raised and leans out to the right. The frisket, a thin dark iron frame, opens beyond it. The paper bank is a small iron stand behind the bed's right end. A ream of paper lies on it, wrapped in brown paper and tied with knotted string.
- With the palette knife from the ink bench in your satchel, tap the ream's knotted string. The knife cuts it with a click, and the wrapper falls open with a hiss. Without the knife, a card says the string is knotted tight.
- Tap the ream again. A sheet rises from it and lies on the raised tympan with a tick. If the frisket is folded, it opens first. A tap on the ream does nothing but tick while the tympan is folded down or the bed is run in, or once a sheet is on the tympan.
- Lay the chase on the bed first, as in the imposing stone section. Then, with the brayer from the ink bench in your satchel, tap the chase on the bed. The brayer rolls across it and back with a hiss. The brass rule, the ship and the line of type turn black and glossy. The chase takes ink only while the tympan is raised.
- Tap the tympan. The frisket folds onto the sheet with a soft thunk.
- Tap the tympan again. It folds down over the chase on the bed with a heavier thunk.
A tap on the folded tympan lifts it again. The frisket stays folded on it. The tympan does not respond while the bed is run in under the press. Turn the crank to run the bed out first, as in the bar section.
The bar
The crank stands low at the front of the bed's rails, to the right of the front upright of the press. It is an iron crank with a wooden handle on a brass hub. It runs the bed in under the press and back out. The bar is an iron lever with a wooden handle. It sticks out to the right from the front upright of the press, below the head. Pulling it brings the iron platen down onto the bed.
- Tap the crank. The bed rumbles in under the platen and stops with a thunk. You can also drag the handle round anticlockwise. When you let go, the bed finishes its run to the nearer end. While the tympan is raised, the bed moves only a few centimetres, clanks and stops.
- Tap the bar, or drag its handle toward you all the way. The platen comes down, and the eagle on the top lever rises and drops back as the bar returns. With the folded tympan over the inked chase and a sheet on the tympan, the platen lands with a heavy thump and the sheet is printed. A drag that stops short of the end lets the bar go back without bringing the platen down.
- Tap the crank again. The bed rumbles back out from under the platen.
The crank and the bar work at any time. Before the tympan is folded down over the inked chase with a sheet on it, a pull of the bar brings the platen down with a clank and prints nothing. The crank does not respond while the bar is pulled.
When the bed runs out with the printed sheet, the tympan lifts, the sheet is hung on the drying line, the workshop goes dark, the oil lamp flares up and the eagle rises with sparks and a fanfare.