The casket

Level 7

This walkthrough shows once you unlock the level.

A walnut casket bound in brass stands on a marble table. A large brass ring runs round the middle of the casket and holds it by its four corners. The ring hangs on pins between two dark iron posts on a walnut plinth. The right post carries a lever with a red knob on its front. The front of the casket has a round glass window with a balance wheel behind it above the ring, with an amber jewel glowing in its hub, and a wooden drawer with a brass knob below the ring. Each end has a brass drop handle. The back has a round brass cover. The lid has a window in the middle, a slot to the left of the window, a crank with a red knob to the right of it, and a brass rosette on each corner.

Tap a part to bring the camera to it, then tap the part again to work it. The camera does not move by itself after a step is done, so tap the next part yourself. To reach a part on the other side of the casket, tap the magnifier button at the bottom left to step back to the whole casket, drag to turn the view round, then tap the part. Work through the sections in order, because each part opens the next one. The rosettes and the crank on the lid turn from the start, but you need the strip from the drawer and the wound spring before they are of use. This level has no parts that move and lead nowhere. The drop handles on the ends and the balance wheel on the front cannot be worked.

The ring
  1. Tap the lever on the front of the right post to bring the camera to it.
  2. Tap the lever. It swings from pointing up to pointing down with a clank.

The ring tips back with a rumble, so the casket lies on its back and its base faces you. Something rattles inside, and a small brass pin near the top right corner of the base sinks into it.

The base

The base now faces you. Two wooden doors with brass knobs cover a square window in its middle. A brass handle with a red grip runs across the top edge of the base, and another across the bottom edge.

  1. Tap the base to bring the camera to it.
  2. Tap the doors. They slide apart to the left and right with a scraping sound and a knock.

Behind the glass is a maze of five by five cells on a dark brass floor. It holds a steel ball, two brass weights, three to five fixed brass studs with domed tops, and a cup. The cup is a dark hole with a bright brass rim. The ball and the weights rest at the bottom of the window or on a stud. The layout changes each game.

The maze follows these rules:

  • Press on a red grip, a handle or the glass, and drag in an arc round the centre of the window. A clockwise drag turns the whole casket a quarter turn clockwise in its ring. An anticlockwise drag turns it a quarter turn anticlockwise.
  • Drag through at least a third of a quarter turn before you let go. A shorter drag springs back and turns nothing.
  • After each quarter turn, the ball and both weights slide straight down the screen at the same time. Each piece stops at the edge of the window, at a stud or against another piece. The casket thunks as it stops turning. The ball ticks and each weight thunks as it comes to rest.
  • The ball drops into the cup when it rolls over the cup or stops on it.
  • A weight is too wide for the cup and slides over it. A weight that stops on the cup covers it, and the ball cannot drop in until the weight slides off.
  • Every turn is allowed, and nothing marks a wrong turn.
  • There is no undo. A turn back the other way does not put the pieces back, because they slide again.

Open the doors before you turn. A drag on a handle turns the casket with the doors shut too, and the pieces still slide.

Use this method:

  1. Before each turn, picture the maze turned a quarter clockwise and a quarter anticlockwise, with every piece slid down the screen.
  2. Look for the turn that leaves the ball at rest in the same row of cells as the cup, with no stud or weight between them.
  3. Make that turn.
  4. Turn towards the cup. Turn clockwise when the cup is to the right of the ball, and anticlockwise when it is to the left. The cup is then below the ball, and the ball rolls down into it.
  5. If no turn brings the ball into the cup's row, make the turn that sends the ball to a new edge or stud, and go back to step 1.
  6. If a weight rests on the cup or between the ball and the cup, turn so that the weight slides out of the way first.

For example, the ball rests at the left end of the bottom row, and the cup is two cells to its right in the same row with nothing between them. Turn clockwise. The bottom row becomes the left column, with the cup two cells below the ball, and the ball rolls down into the cup. The shortest way from the start takes five to nine quarter turns.

If the pieces end up where no turn brings the ball to the cup, start the level again. Tap the house button at the top right, confirm, and tap Begin. The maze has a new layout.

When the ball drops in, a clank sounds and the ball sinks into the cup. The casket turns back square in its ring with a rumble, the ring tips upright again, and the casket settles with a thunk. A catch clanks and the drawer in the front springs out a little.

The drawer

The drawer does not move until the ball in the base drops into its cup.

  1. Tap the drawer below the ring on the front of the casket. The camera looks down into it from above.
  2. Tap the brass knob on the drawer front. The drawer slides out with a scraping sound and a knock.
  3. Tap the brass winding key on the left of the drawer floor. It flies to your satchel at the top left of the screen.
  4. Tap the roll of pale card with rows of dark holes on the right of the drawer floor. It flies to your satchel as the punched strip.

When both are taken, the round brass cover on the back of the casket swings aside with a clank and a puff of dust.

The winding socket

This needs the winding key from the drawer. The cover stays shut until the drawer is empty.

  1. Tap the magnifier button at the bottom left to step back to the whole casket. Drag to turn the view round to the back.
  2. Tap the round brass plate a little above the middle of the back wall. The cover has swung aside and shows a toothed brass ratchet wheel, a steel pawl and a brass boss with a square steel end in the centre.
  3. Tap the socket in the centre. The winding key slides into it with a click. Without the key, a clank sounds and a message says the socket takes a winding key.
  4. Tap the key six times. Each tap turns the key a quarter turn clockwise, the pawl clicks over the ratchet wheel, and the lid rises a little.

After the sixth turn, a thunk and a hiss sound. A lamp inside the casket lights, the window on the lid glows, and the balance wheel behind the round glass on the front starts to swing and tick.

The lid

This needs the punched strip from the drawer. The lid opens only after the spring is wound at the winding socket.

  1. Tap the magnifier button to step back to the whole casket. Drag the view round to the front, then tap the lid. The camera looks down at the lid from the front. On a phone held upright, the camera looks along the lid from its left end, so the slot is at the bottom, the front of the lid is on the right, and the window appears turned a quarter.
  2. Tap the slot to the left of the window. It is a dark gap between two brass bars. The strip feeds in with a click, and its end stands up out of the slot. The window shows the blank start of the strip, with a row of small holes along each edge. Without the strip, a clank sounds and a message says the slot takes a punched strip.
  3. Tap the crank to the right of the window. It turns once round and moves the strip on by one frame. While the lamp inside is lit, a chime sounds for each frame that holds a glyph.
  4. Read the frame. With the lamp lit, the card shows dark brown in the window and the holes glow bright. A pattern of holes forms one glyph. One large hole sits in a corner of the frame. That corner names the rosette the glyph belongs to: the large hole is in the same corner of the window as its rosette is on the lid.
  5. Tap the crank three more times and read each frame. The strip holds four glyph frames, one for each rosette, and then the blank start comes round again. The glyphs and their order change each game.

The eight glyphs are a sun with eight rays, a crescent moon, a five-pointed star, a gear wheel, a key, a drop, a diamond and a spiral. The frames are easiest to read after the spring is wound, when the lamp inside lights the holes from below.

Each rosette has eight polished brass lobes and a red pointer. It stands on a brass ring engraved with the eight glyphs, in a different order round each ring. Small brass gears between the rosettes link each rosette to the two rosettes beside it along the edges of the lid. The goal is for each red pointer to point at the glyph the strip gives for its corner. The starting positions change each game.

The rosettes follow these rules:

  • Tap a rosette to turn it one step anticlockwise, to the next glyph on its ring. The two rosettes beside it along the edges of the lid each turn one step clockwise. The rosette in the opposite corner does not move.
  • Every tap is allowed, and nothing marks a wrong tap.
  • To undo a tap, tap the same rosette seven more times. Eight taps on one rosette put all three moving rosettes back where they were.

Use this method. For each rosette, count the steps anticlockwise from its red pointer to its glyph. This is the rosette's count, from 0 to 7. A tap lowers the tapped rosette's count by one and raises the counts of the two rosettes beside it by one. A count of 7 raised by one becomes 0.

  1. Compare the back left and front right rosettes. Tap the one with the larger count until their counts are equal.
  2. Compare the back right and front left rosettes. Tap the one with the larger count until their counts are equal. These taps raise the back left and front right counts together, so those two stay equal.
  3. If the four counts are not all equal, tap the back left and front right rosettes once each. Repeat until all four counts are equal. Each round lowers the back left and front right counts by one and raises the other two by two. It takes at most seven rounds.
  4. Tap all four rosettes once each. Each round turns every rosette one step clockwise and raises every count by one. Repeat until every red pointer points at its glyph. It takes at most seven rounds.

For example, the counts are back left 3, back right 1, front right 2 and front left 4.

  1. Back left has the larger count of the back left and front right pair. Tap it once. The counts become back left 2, back right 2, front right 2 and front left 5.
  2. Front left has the larger count of the back right and front left pair. Tap it three times. The counts become back left 5, back right 2, front right 5 and front left 2.
  3. Tap back left and front right once each. All four counts become 4.
  4. Tap all four rosettes once each, four times over. The counts rise to 5, 6, 7 and then 0, and every pointer points at its glyph.

When every pointer points at its glyph and the spring is wound, a clank sounds. The front right rosette rises off its spindle and flies to your satchel as the rosette gear. The lid swings open on its back edge with a hiss and a rumble, and stops with a knock. If the rosettes were set before the spring was wound, the lid opens as soon as the sixth turn of the key is done.

The mechanism

This needs the rosette gear from the lid.

Inside the open casket, a lamp under a glass globe on a brass column stands at the back left of the deck. A brass dome stands to the right of the centre, towards the back. A row of steel spindles runs from left to right along the front of the deck, starting at a large dark brass drum on the left. Every spindle carries a brass gear except the fourth from the left. The gears up to the empty spindle turn while the lamp is lit.

  1. Tap inside the open casket to bring the camera to the mechanism.
  2. Tap the empty steel spindle, the fourth from the left. The rosette gear drops onto it with a clank, gear side down, and the whole row of gears turns faster with a rumble. Without the gear, a clank sounds and a message says the gear is missing.

When the gear is on, the workshop goes dark, the lamp inside burns brighter, the four petals of the dome fold open and a clockwork bird rises from it and sings the glyphs of the strip.