The brick town

Level 24

This walkthrough shows once you unlock the level.

A town of toy bricks stands on a green baseplate in the middle of the wooden table, with a railway running round its edge. The engine shed stands over the left side of the track, with a yellow crane over its unfinished front wall and an instruction board on top of the crane. The clockwork cart's walled yard fills the middle, with a long stand of five sockets along its front. The platform runs along the right side, with a red and black engine standing at it and a lamp with an amber light brick at its back end. The lamp glows brighter with each part of the town you finish. The moulding press stands on the table at the left of the baseplate, with a belt running to the crane. A wooden brick box stands on the table at the front right. You open the box, mould the bricks, build the shed's wall, drive the cart to the platform and send the engine round the town. The press and the shed belong together, and the cart can be worked at any time once you have its driver and the key. The engine needs both the finished shed and its driver.

Some parts move and open nothing: the windmill behind the yard, the street lamp and the barrier at the level crossing on the front of the track, the clock at the front end of the platform and the steam whistle on the press's hopper.

The satchel is the bar along the bottom of the view. Tap a slot to see that item close up. Drag to turn it, and scroll or pinch to zoom. Tap outside the item, the cross at the top right, the magnifier button or the same slot to close it.

The brick box
  1. A round red brick pegs the box's lid near its left end. Tap the peg. It pops out and lies beside the box.
  2. Drag the lid to the right, or tap it. It slides out of its grooves and lies on the table. With the peg in, the lid only knocks.
  3. A wooden tray with three compartments sits in the box. Tap the brass lever and the toy figure to take them. The figure has no head. The brick lever stays in the satchel each time you use it.
  4. Tap the brass ring in the tray's middle divider. The tray lifts out and sets down in front of the box.
  5. On the floor of the box lie the figure's head in a black top hat and a brass winding key. Tap each to take it. The key stays in the satchel each time you use it.
  6. Open the figure in the satchel, then tap the head's slot. The head goes on, and the figure becomes the driver.
The moulding press
  1. A grey brick is stuck in the press's mould, in the window at the front. Pulling the press lever at the right now only knocks the ram on it.
  2. Tap the stuck brick with the brick lever in the satchel. It pops out into the scrap tin in front of the press.
  3. Tap the handle of the bellows at the left of the press. Each stroke brightens the firebox and raises the needle of the gauge. The needle falls back slowly as the press cools.
  4. Pump until the needle stands in the green arc, then pull the press lever. A cold press puffs smoke and makes nothing.
  5. The ram strikes and the press moulds the batch of bricks for the shed. The first brick goes along the belt to the crane's hook, and the next three wait on the belt.
The engine shed
  1. The board on top of the crane shows the plan of the shed's front wall at the top. Red cells hold bricks. Dark cells stay open: the doorway over the rails and one or two windows. The plan changes with each game.
  2. Below the plan the board shows the batch in the order the press makes it, in two rows read left to right. A brass pointer marks the brick on the hook. A brick's colour gives its length: white is one stud, yellow two, blue three and red four.
  3. Drag the crane's carriage left or right to move the hanging brick one stud at a time. Tap the carriage to let the brick go.
  4. A brick falls until any part of it meets the first stud under it. It stops on the highest brick in the columns it covers, and any gap under it stays open. A brick laid across a gap closes the gap over, as a lintel does over a doorway.
  5. When a brick lands in an opening of the plan, or closes off a cell the plan fills, the red lamp at the right end of the crane lights. Tap the last brick laid to prise it off with the brick lever. It goes back on the hook. You can take back as many bricks as you need, one at a time from the top.
  6. A way to solve any batch: before you let a brick go, check that every cell it lands on is red in the plan and that every cell it covers over is either already a brick or dark in the plan. Build both sides of the doorway up to the course under the lintel before a brick that must cross the doorway comes. Look along the batch to see which brick is long enough to reach over the doorway from one side, and keep a column beside each window one course lower until the brick that covers the window comes.
  7. When every brick of the batch is laid and the wall matches the plan, the crane lowers the roof onto the shed, and the signal behind the shed drops to clear.
The clockwork cart
  1. The cart stands in its bay in the front row of the yard, facing the back. Tap it with the driver to seat the driver. A figure with no head does not sit.
  2. Tap the cart again with the winding key to wind its spring.
  3. The stand in front of the yard has five sockets with one to five brass pips. The tray at its left holds the command bricks you can use. Yellow, with a straight arrow, drives the cart one cell forward. Red, with an arrow bending left, turns the cart a quarter turn to its left where it stands. Blue turns it a quarter turn to its right.
  4. Tap a socket to press a brick from the tray into it, and tap again to change it: yellow, red, blue and empty again. A kind the tray has run out of is skipped.
  5. Pull the red brake lever at the stand's right end. The cart reads one socket a beat, from the socket with one pip to the socket with five, and then from the first again. With an empty seat, an unwound spring or an empty socket, the lever springs back.
  6. A cart driven into a pillar or the wall stops with a bump and sparks. A cart that has not reached the gate after sixteen beats runs down. Either way it rolls back to its bay, and you can change the program and try again.
  7. The gate is the gap in the yard's right wall with the red and white boom. A way to solve any yard: for each program the tray allows, trace the cart beat by beat from its bay, turning it where it stands for red and blue and moving it a cell for yellow. Drop a program as soon as its path meets a pillar or the wall. A program with as many left turns as right turns repeats the same steps in the same direction, so the cart drifts across the yard. A program with one more turn one way than the other turns its path a quarter turn each time it repeats.
  8. When the cart reaches the gate, the boom lifts, the cart drives out onto the platform and the driver climbs into the engine's cab.
The locomotive
  1. The engine stands at the platform, facing the back of the table. On the back of its coal bunker are a steel winding square and a brass regulator handle with a red knob.
  2. Tap the winding square with the winding key. The engine is wound and its lamp lights.
  3. Look at the points ahead of the engine. Their blades lead onto the siding at the right, which ends at red buffers. Tap the blue lever beside the track to throw the points between the siding and the main line.
  4. Pull the regulator handle. With the points set for the siding, the engine runs onto the siding, bumps the buffers and backs to the platform.
  5. Until the shed has its roof and the driver sits in the cab, the handle springs back and the engine stays.
  6. With the engine wound, the driver in the cab, the shed finished and the points set for the main line, pull the handle. The workshop goes dark, the platform lamp lights the town, and the engine whistles and runs round the town, through the shed, over the level crossing and back to the platform.