The singing bird box

Level 28

This walkthrough shows once you unlock the level.

The singing bird box stands on four gilt bun feet on the wood table. Its panels are blue enamel over engine-turned gilt, in gilt frames. The front is a fall front with a painted medallion and a gilt cartouche. A rosette and a small round window are on the left side. A door is on the back. Two painted leaves close an oval opening in the top, inside a gilt ring. The drawer, the fall front and the back door can be worked from the start. The crank key from the drawer opens the fall front and winds the spring, in either order. The bird rises once the cylinder plays its tune clean, and the cage rises once the bird sings its phrase clean.

The other three bun feet each turn a quarter and spring back. The drop handles on the two sides swing up and fall back. The brass bird call on the table warbles when its plunger is dragged in or out. None of these opens anything.

The drawer
  1. Look at the four bun feet. The knurled band of the front left foot is rubbed brighter than the others.
  2. Tap that foot, or drag sideways across it. It turns one whole turn with a tick for each quarter.
  3. Turn it three times. A catch clicks and the drawer springs a little way out of the front of the plinth.
  4. Tap the drawer to pull it out. A tap while it is out pushes it back.
  5. Tap the crank key on the red velvet. It goes into the satchel.
The fall front
  1. Tap the gilt cartouche at the top of the front. Its cover swings aside on its pin and shows a keyhole.
  2. Tap the keyhole with the crank key in the satchel. The key goes in. Without the key a note says the keyhole wants one.
  3. Drag the key a half turn clockwise, or tap it. The bolt draws and the fall front swings down and lies flat in front of the box. The key stays in the satchel.
  4. The inside face of the fall front is now face up. It shows a bird on a branch over the tune: eight beats numbered 1 to 8, four lines, and one or two coloured notes in each beat. The lowest line is the lowest note, in red. Then come amber, green and blue.
The spring
  1. Find the gilt rosette on the left side. A square arbor stands in its middle. The round window above it shows a steel star wheel with five points.
  2. Tap the arbor with the crank key in the satchel. The key goes on.
  3. Drag the key round clockwise, or tap it for a whole turn. The ratchet ticks and the star wheel steps a point for each turn. A drag the other way slips and winds nothing.
  4. After three turns the star wheel stops, the key comes off and the spring is wound.
The cylinder

The cylinder lies behind the fall front. It is pierced in eight rows of six holes. A number from 1 to 8 at its left end names each row, and a gilt pointer at the left end marks the row that faces the front. Over the cylinder lies a steel comb of six teeth. Each tooth has a bead in the colour of its note. The longest, lowest teeth carry lead weights. Two of the four notes have two teeth each.

  1. Tap the knurled knob on the right end to turn the cylinder one row on. Drag the knob up or down to turn it several rows either way.
  2. Tap a hole in the row facing the front to press a pin into it. Tap a pin to pull it out.
  3. Pull the start lever above the knob. The cylinder plays from row 1, and each pin plucks the tooth above its hole. With the spring not wound the lever moves and the cylinder stays still.

The rules:

  • Each note painted in a beat needs one pin in that beat's row, on a tooth whose bead has the note's colour. A note with no pin leaves the beat silent.
  • A pin on a tooth whose colour is not in the beat plays a sour note.
  • A tooth rings on after it is plucked. A red bass tooth rings for two beats, and every other tooth for one beat. A tooth plucked again while it rings squeals and shakes.

Method:

  1. Find each beat where a note comes again while its last tooth still rings: a red note within two beats of an earlier red note, or another note in the next beat.
  2. Give those beats the other tooth of the note, and give the beats round them the first tooth. Work forward from beat 1.
  3. Pin each beat's notes on the teeth chosen, row by row, and pull the start lever.

When the turn plays clean, a catch clicks under the top. The two painted leaves in the oval drop and slide apart under the top, and the bird rises out of the box on its perch, turns once and stands still.

The cams
  1. Go to the back of the box. Two small gilt turn-buttons on the stile at the right of the door hold it shut. Tap each to stand it upright.
  2. Tap the door. It swings open on its hinges at the left.
  3. Behind it, four cams stand in a row, each with a coloured ring on its face and a follower rod with a flag of the same colour above it. From the left they drive the bellows (white), the beak (amber), the head (red) and the wings (blue). Each cam has raised lobes on some of its eight sectors. The bellows cam is riveted and does not turn.
  4. Tap a cam to turn it an eighth of a turn clockwise. Drag it round to turn it either way.
  5. Tap the trip lever between the turn-buttons. The cams make one turn in eight steps. At each step the rod on a raised lobe rises: the bellows blow, the beak opens, the head turns, the wings lift.

The rules:

  • The beak may open only while the bellows blow. A beak that opens with no air gapes with no note.
  • The wings may flap only while the bellows rest. Wings that flap while the bellows blow make the bellows wheeze.
  • The head shares a slot with the beak and with the wings. The head raised together with either knocks, and the turn stops there.

Method:

  1. Turn the beak cam until each of its lobes lies on a bellows lobe when they pass the top together.
  2. Turn the wings cam until its lobes lie on sectors where the bellows lobe is low.
  3. Turn the head cam until its lobes lie on sectors where neither the beak nor the wings are up.
  4. Pull the trip lever and listen. Only one setting is clean.

With the bird risen, a clean turn makes the bird sing its phrase, turn its head and flap its wings. A click sounds and the latch of the gilt ring round the oval drops.

The cage
  1. Look at the gilt ring round the oval opening. A loop stands on its front. Before the bird has sung its phrase clean, the loop lifts a hair and drops back.
  2. Drag the loop up, or tap it. The ring rises with sixteen gilt wires out of holes in the top, and four arched ribs swing up and meet at a finial above the bird.

The workshop dims, a lamp lights in the cage, and the bird sings over the cylinder's tune.