The aetherphone

Level 15

This walkthrough shows once you unlock the level.

A pocket telephone lies in a walnut presentation case at the front left of the marble table. An empty brass dock stands in the front middle. An exchange tower stands at the back right: a walnut cabinet with glass doors, a brass lattice mast on top and a beacon at the top of the mast. A brass birdcage with a clockwork songbird, the aviary, stands at the front right. A framed photograph of the songbird stands on a strut behind the left side of the birdcage. Drag to orbit round the table. Tap a part to fly to it. Tap the step-back button at the bottom left to zoom out.

Open the case first. It gives the winding key, the eject pin and the SIM plate. The key winds both the phone and the tower, in either order. The SIM tray works as soon as the phone stands in its dock. The exchange doors and levers work at any time, but its lamps stay dark until the tower runs. The camera needs the phone running and the tower running. The call comes last. These parts move and lead nowhere: the brass mute slider and the two volume buttons on the phone's left edge, the torch, compass, music box and clock icons on the home screen, the bell switch and the brightness slider in Settings, and the winding key on the front of the birdcage's base. The other eight icons on the home screen jiggle and open nothing.

The case
  1. Tap the leather lid of the case, with the gilt winged gear on its pale panel. The lid rises slowly with a hiss, slides off and leans against the left side of the case with a knock. The phone lies face up in a velvet bed.
  2. Tap the phone. It lifts out, swings upright along an arc and clicks into the yoke of the brass dock.
  3. Tap the gold ribbon tab at the front end of the bed, where the foot of the phone lay. The velvet flap folds over the front wall of the case. A compartment opens under it. The tab does nothing while the phone lies on it.
  4. Tap the winding key in its two spring clips on the left of the compartment. It flies to the satchel at the top left of the view, and a card names it.
  5. Tap the cream card on the right of the compartment. The eject pin and the SIM plate fly to the satchel.

The key stays in the satchel after each use.

The power

This needs the winding key from The case.

  1. Drag to orbit round to the back of the phone in its dock. A tap on the phone from the front does not turn the view round to its back.
  2. Tap the back of the phone. The view frames the oxblood enamel back: a lens and a torch at the top, a round sapphire window over the clockwork in the middle, and a round brass boss with a keyed slot below the window.
  3. Tap the boss. The winding key fits into it with a click. Without the key, a card says the socket takes a key.
  4. Tap the key four times, or drag it round clockwise. Each turn ticks the ratchet and turns the spring barrel behind the window. A dragged turn in the other direction does nothing.
  5. After the fourth turn, the key stops with a knock, comes out of the boss and disappears. The balance wheel behind the window starts to swing.
  6. Tap the step-back button, orbit round to the front of the phone and tap its screen. The view frames the front. The blue hand in the small cream dial at the top right of the front points to full.
  7. Tap the power button: the brass bar with a mother-of-pearl top on the right of the phone's top edge. A chime sounds, and the winged gear appears in amber on the screen. Then the screen writes hello, bonjour, hallo, ciao and hola in turn, with "Press Home to open" below.
  8. Tap the Home button: the round mother-of-pearl button in a brass ring below the screen. A chime sounds, and the home screen opens with 16 enamel icons. The bar at the top of the screen shows "No SIM" and a small airship.

Before the spring is wound, a tap on the power button shows a red spiral struck through on the screen for about a second. A tap on the power button while the screen is lit turns it dark. Tap it again to light the same page.

The SIM

This needs the eject pin and the SIM plate from The case. The pin and the tray work while the phone is dark. Settings needs the phone running, see The power.

  1. Orbit a little to the right of the phone. Three knurled thumbwheels sit at the top of its right edge. A nickel tray face sits below them, with a small dark pinhole in a brass ring below the tray. Tap the tray face. The view frames the right edge with the screen beside it.
  2. Tap the pinhole. The pin slides in with a click, and the brass tray springs out of the edge. A tap on the tray before this only ticks.
  3. Tap the open tray. The SIM plate drops into it with a click.
  4. Tap the tray again. It slides home with a click. "No SIM" leaves the bar at the top of the screen.
  5. On the home screen, tap the grey cog icon at the right end of the bottom row. Settings opens with three rows: an airship, a bell and a sun.
  6. Tap the amber switch on the airship row. The switch turns dark and its knob moves to the left. The small airship leaves the bar at the top of the screen.

Until the tower runs, the bar shows no signal and a small turning gear. Tap Home to go back to the home screen.

The tower

This needs the winding key from The case.

  1. Tap the mast or the right side of the tower's cabinet, the side that faces the right of the table. The view frames that side. A square steel arbor stands in a brass boss on it, with a small cream dial below it.
  2. Tap the arbor. The winding key fits onto it with a click. Without the key, a card says the arbor takes a key.
  3. Tap the key four times, or drag it round clockwise. Each turn ticks. The iron weight climbs the mast on its chain, and the hand of the small dial turns.
  4. After the fourth turn, the mechanism clanks and rumbles, and the key disappears. The rotor in the beacon spins up behind its closed brass petals. The two brass balls on the governor above the beacon swing out, and the lamp behind the rotor brightens.
  5. Wait. A hiss sounds, the six brass petals open over the lit spinning rotor, and a chime sounds. The tower ticks steadily from then on.

The digits on the rotor blur into rings while it spins. The phone's camera reads them, see The camera.

The camera

This needs the phone running, see The power, and the petals of the beacon open, see The tower.

The camera's photo is right only when the three thumbwheels on the phone's right edge let in the right light and break no limit. The top wheel sets the aperture, from f/1.8 to f/16. The middle wheel sets the shutter, from 1/30 to 1/2000 of a second. The bottom wheel sets the sensitivity, from 50 to 1600. Each wheel's setting is the number at the fine brass wire across its face. The shutter wheel shows 30 to 2000, and the screen shows the same values as 1/30 to 1/2000. Each mark on a wheel halves or doubles the light.

The phone shows these rules:

  • The meter under the live view has a scale from −3 to +3 and a triangular needle. The needle shows how many marks too bright or too dark the light is. Right of 0 is too bright. Left of 0 is too dark. The needle turns green at 0.
  • A shutter slower than its limit streaks the spinning rotor in the photo.
  • A sensitivity above its limit covers the view with grain.
  • An aperture opened past its limit, toward f/1.8, adds a glowing halo.
  • An aperture closed past its other limit, toward f/16, blurs the view flat.

Only one setting gives the needle 0 with no fault. The right photo also needs the whole rotor inside the view at 5×. Any other photo shows the rotor's face blurred into rings, with no digits. To undo a change, turn the wheel back.

  1. Tap the thumbwheels or the dock. The view frames the phone from the front right with the dock below it.
  2. On the home screen, tap the dark grey camera icon, the first icon of the second row. The screen shows the live view from the lens on the back of the phone, the meter, the three settings, the buttons 1× and 5× at the top, a large cream shutter button at the bottom and the last photo at the bottom left.
  3. Drag the black ball at the end of the tiller, the bar that sticks out to the front right of the dock's brass turntable. The dock turns. Turn it until the back of the phone faces the tower at the back right, and the tower stands in the middle of the live view. The screen turns a little to the left.
  4. Tap the knurled brass knob at the right end of the yoke. The top of the phone leans one step toward you, the pointer moves one mark on the brass quadrant, and the lens on the back looks higher. Tap it until the beacon sits in the small circle at the middle of the live view. After the sixth step, the next tap sets the phone upright again. A drag on the knob steps it either way.
  5. Tap 5× at the top of the screen. The rotor fills most of the live view. Move the tiller and the knob until the whole round of the rotor is inside the view.
  6. Tap the photograph behind the birdcage to read its mount. A setting is pencilled under the picture of the songbird, for example "f/2.8 · 1/250 · ISO 400". Tap the step-back button and tap the phone's wheels to frame them again.
  7. Set each wheel to the value on the mount. Tap the upper half of a wheel to move it one mark toward f/16, 1/2000 or 1600. Tap the lower half to move it one mark toward f/1.8, 1/30 or 50. A drag round the wheel also turns it. The wheel ticks, and the screen shows the new value. The needle stands at 0 and turns green.
  8. Tap the cream shutter button, or tap either volume button on the left edge. The shutter clicks, the screen flashes, and the photo opens in a gold frame.

Worked example with made-up values: the wheels stand at f/8, 1/60 and 1600, and the mount reads "f/2.8 · 1/250 · ISO 400". Tap the lower half of the top wheel three times: f/8 to f/5.6, f/4 and f/2.8. Tap the upper half of the middle wheel twice: 1/60 to 1/125 and 1/250. Tap the lower half of the bottom wheel twice: 1600 to 800 and 400.

Without the photograph, find each limit on the phone:

  1. Turn the bottom wheel to the highest sensitivity that shows no grain in the live view.
  2. Turn the top wheel to the widest aperture, the smallest f-number, that shows no halo.
  3. Turn the middle wheel until the needle stands at 0 and turns green.

If the live view is too dark or too white to judge, first turn the middle wheel to bring the needle closer to 0.

The right photo shows the rotor frozen with four sharp digits on it. Spread two fingers or scroll in on the screen to magnify it. Dark lines divide the rotor into four quarters with one digit in each. A small red triangle marks the first digit. The first digit stands in the same quarter of the rotor as the red triangle. Read the other three clockwise from it. Each digit stands with its top toward the rim, which tells a 6 from a 9. Write the four digits down. A later photo replaces this one. Tap the camera picture under the photo to go back to the live view.

The exchange

The tower's doors and levers work at any time. The lamps light only while the tower runs, see The tower.

  1. Tap the glass doors on the front of the tower's cabinet, the side that faces the dock. They swing open on the switching frame.
  2. Read the frame. Three brass straps run across the top of the frame, with a sun, a moon and a star on plates at their left ends. Three straps run across below them, with a key, a drop and a diamond on plates at their right ends. Three upright trunk bars cross all six straps, marked I, II and III on plates below them. A lamp sits at every crossing.
  3. Read the eight tickets in two rows of four below the frame. The upper glyph on a ticket names one of the top three straps. The glyph below the arrow names one of the lower three straps. One ticket carries a red telephone. Two tickets are soldered: their levers have a dark iron knob, a steel blob at the pivot and an iron bar across them. They do not move.
  4. Tap a ticket or its red knob to move its lever to the next mark: a small ring for off, then I, II and III, from left to right. After III, the next tap sets it to off. Each tap clicks.

The rule: a call on trunk I, II or III uses the crossing of its upper glyph's strap with that trunk, and the crossing of its lower glyph's strap with the same trunk. No crossing may carry two calls. So two tickets that share an upper glyph must be on different trunks, and two tickets that share a lower glyph must be on different trunks.

While the tower runs:

  • A crossing that carries one call lights white.
  • A crossing that carries two calls lights red, throws sparks and buzzes.
  • A ticket's small lamp lights green when its call is on a trunk and shares no crossing. Otherwise it glows amber.

To undo a move, tap the lever on through the other trunks to off or to the trunk you want.

A method that works for any frame:

  1. List each ticket's upper glyph, lower glyph and, for the two soldered tickets, its trunk.
  2. For each free ticket, cross out each trunk already used by a ticket with the same upper glyph or the same lower glyph.
  3. Set every ticket that has one trunk left to that trunk. Its trunk now crosses out choices on other tickets. Repeat.
  4. When every free ticket left has two or three trunks, set one of them to one of its trunks and go on with step 3. If a ticket is left with no trunk, a red crossing shows. Go back and change the last choice.

Worked example with made-up values: a soldered ticket sun over key sits on II. A ticket sun over drop cannot use II, because the sun strap's crossing with II is in use. A ticket moon over key cannot use II, because the key strap's crossing with II is in use. If a soldered ticket star over drop sits on III, the ticket sun over drop can use only I.

When all eight ticket lamps are green, the master relay clacks and the lamp behind the beacon's rotor turns white.

The call

This needs:

  • The SIM plate in and Airship Mode off, see The SIM.
  • The tower running, see The tower.
  • The four digits from the photo, see The camera.
  • Every ticket lamp on the frame green, see The exchange.
  1. Tap the phone's screen to frame the front of the phone. Tap Home to go to the home screen.
  2. Check the bar at the top of the screen. It shows four bars and "Aether" when the phone has a signal.
  3. Tap the green telephone icon at the left end of the bottom row. A keypad opens.
  4. Tap the four digits from the photo. Each key plays a tone, and the digit shows above the keypad. To remove the last digit, tap the key with a cross at the right of the green button.
  5. Tap the green call button below the keypad.

The screen shows one of these messages when a call cannot go through:

  • "No service" with a short tone: the phone has no signal.
  • "Number unobtainable" with a long steady tone: the number is wrong.
  • "All circuits busy" with three rising tones: the number is right, but a ticket lamp on the frame is not green.

With the right number and a clear frame, the screen shows the songbird's portrait with "The aviary" and "Calling", and the finale plays: the workshop goes dark round the flaring beacon, the birdcage's bell rings, and the songbird flies round the beacon and lands on the phone.